Air Conditioner, Compressor To Fit Miscellaneous® – New (Aftermarket) - Replaces OEM 72162168
$211.08
In stock
SKU
WN-72162168
Replacement parts for:
Allis Chalmers®
New
Click to Email for Parts Questions
Sanden style, with Clutch, 5-1/4" Pulley, 2A Pulley Grooves
Additional Information
Condition | New |
---|---|
Equipment Type | Tractor |
Replacement Parts For | Allis Chalmers®, Steiger®, White® |
Compatible Models |
Steiger®: BC, CA Allis Chalmers®: 9130, 9150, 9170, 9190, 9630, 9650, 9670, 9690 White®: 100, 120, 125WORKHORSE, 140, 145WORKHORSE, 170WORKHORSE, 195WORKHORSE, 2-105, 2-110, 2-135, 2-155 |
Cross Reference Numbers | 72162168, 351224T9, 351224T9-R, 351224T91, 500-1434, 500-496, 500-676, 504-1427, 504-1434, 504-1443, 72162168-R, 9114 |
Additional Information | The following steps must be performed prior to compressor installation for warranty to be considered on all A/C compressors. Failure to do so will void all warranty. 1.The system (condenser, evaporator, lines, etc.) needs to be flushed with an approved liquid℗ 2.A new receiver-drier or accumulator needs to be put on.3.The expansion valves or office tubes needs to be inspected - cleaned - replaced. 4.Inspect the lines.5.The condenser and evaporator needs to be checked/cleaned of debris. 6.Properly vacuum system down. 7. Use the recommended type and amount of oil needed. 8.Install the proper Freon level. 9. Hand turn the compressor after filing with Freon. 10.Check the voltage to the compressor. 11.Check the system for leaks. 12.The proper documentation/shop work order of the above steps needs to accompany the compressor for warranty. |